Quingo Flyte Mk2 Mobility Scooter

Self-loading scooter with easy-to-install docking system

Wish you had a mobility scooter that can drive itself in and out of your vehicle? Quingo makes it possible with its Flyte MK2 model. Say goodbye to heavy lifting, thanks to the scooter’s docking system that can be installed onto most SUVs and hatchbacks with the aid of its adaptor kit. The docking station consists of a frame that has legs with suction pads, metal plates with heavy-duty velcro, and lightweight ramps. You position the metal plates onto the carpeted surface at the back of your car where the frame's legs will stand. Secure the legs to these plates using the levers on each suction pad.

Once you've slid out and lowered the outer rails of the ramps from your car’s tailgate, you can use the two-button remote control to unload or load the scooter from your vehicle within a minute. The ramps come with an assisting cane to lower the ramps to the ground, so you won't have to do any bending. You need to fold the scooter to safely load it up to your vehicle.

Quingo has upgraded the docking station to give you access to your back seats by allowing the easy removal of the ramps from the frame. But with the rails gone and only the frame in place, this means you cannot load the scooter while the backrest of your backseats is upright.

You can enjoy the Quingo Flyte MK2’s patented 5-wheel drive, self-centring steering, and 40-inch turning radius with the convenience of hassle-free loading and unloading. Its padded seat has a forward and reverse mechanism to bring you closer to the steering tiller or farther out for an easy dismount. The backrest and armrests are adjustable, allowing you to set the chair to your preferred height, width, and depth.

A Quick Peek at Specs

Weight (with batteries): 116.5 kg

Weight Capacity: 159 kg

Dimensions (LxW): 120 x 62 cm

Maximum Speed: 6.4km/h

Battery Life: Up to 37km or up to 54km with battery extension pack

Tyres: Pneumatic

Technical Specifications

Motor Type: 250W 2-Pole

Battery: 12 V 22AH x 4 with an option of 22Ah x 2 extension pack

Seat Dimensions: 410 mm x 400 mm

Seat Height from the Ground: 710 mm

Distance Between Armrests: 430 mm – 585 mm

Ground Clearance: 75 mm with anti-beaching technology

Drive Wheel: 250 mm

Turning Circle: 1,020 mm

Slope Ability: 6 degrees (normal use), 30 degrees (loading)

Other Features

• SUV adaptor kit for installation included: tool-free and no vehicle modification required
• Scooter self-loads below 60 seconds
• Adjustable seat (adjustable backrest and adjustable and removable armrests)
• Adjustable tiller angle
• Rear anti-tip wheels